米乐m6网页版登录入口欢迎您！

新闻中心

首页

新闻中心

公司新闻

行业动态

资料下载

联系我们

市场部：
0315-6530512 / 6530519
0315-6530511 / 6530516
15232595913 / 13831518929
15032970915 / 13933354616
15613578090 / 13932588053
邮箱：7048444@163.com
传真：0315-6530555
网址：www.jinshars.com
地址：河北省迁安市经五路东侧(现代装备制造业产业聚集区内)

燃烧器故障的原因有哪些？

发布时间：

2022-12-20 17:00

来源：

作者：

当燃烧器发生故障时，必须要检查燃烧器正常运转的基本条件是否满足，具体如下：

1、供电是否正常？

2、燃料供应系统是否正常？如供气管道上的燃气压力是否正常？球阀是否打开？油箱里是否有油？供油回油管道上的阀门是否打开？

3、所有的调节器和控制器的调节和联锁控制是否正常？如温度调节器、水流量开关、水位开关、油位开关、燃气压力开关等。

4、燃烧时的空气量及燃气量或燃油量是否被改变？

以上的几个问题点都排查后，根据相对应的问题有针对性的进行维护，可以更好的处理掉燃烧器发生的基本故障。

What are the causes of burner failure?

When the burner fails, it is necessary to check whether the basic conditions for normal operation of the burner are met, as follows:

1. Is the power supply normal?

2. Is the fuel supply system normal? If the gas pressure on the gas supply pipe is normal? Is the ball valve open? Is there oil in the tank? Is the valve on the oil supply and return pipe open?

3. Is the regulation and interlock control of all regulators and controllers normal? Such as temperature regulator, water flow switch, water level switch, oil level switch, gas pressure switch, etc.

4. Is the amount of air, gas or fuel changed during combustion?

After all the above problems are checked, targeted maintenance can be carried out according to the corresponding problems, which can effectively eliminate the basic faults of the burner.

关键词：

燃烧器,燃烧器厂家,燃烧机厂家,低氮燃烧器

相关新闻

2024-05-04

2024-03-14

迁安融媒报道：科研之花刘春美----米乐公司副总工程师